technical data sheet cable stripper for portable electric drill 60w010-c02 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18- 499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 suitable cables 3/8" helical corrugated cable flexline 3/8 s (recommended) packing standard 1 pce in box weight 410 g/pce replacement blades 1 pcs type pj-2: 60w010-c05/50 1 pcs type pj-4l: 60w010-c02/50 1 pcs type oc-97-706: 60w010-c01/51 draft date approved date rev. engineering change nu mber name date rong fang 05/07/05 gramsamer 22/07/05 a00 04-0130 r ong fang 05/07/05 while the information has been carefully compiled to the best of our knowledg e, nothing is intended as representation or warrant y on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
technical data sheet cable stripper for portable electric drill 60w010-c02 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18- 499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 application feature the cable preparation tool automates the preparatio n of corrugated coaxial cables. all preparation dimensions are controlled by the tools: no measurin g required. connector order no.: 53s115-c02n1, 53k115-c02n1, 5 3s215-c02n1 60s115-c02n1, 60k115-c02n1, 60s215-c02n1 important tool tips and instructions 1. always wear safety glasses and protective gloves and dont insert the finger into the tool. 2. to cut the cable use a hacksaw or use cable cutt ers in a rocking motion to maintain the cylindrical shape of the cable. 3. ensure that at least 20 cm (8) of the cable is straight before using the tool. 4. the use of a cordless drill is recommended (3/8 14.4v minimum / 1/2"18v recommended), operate the drill in the 400-650 rpm range. 5. we recommended practicing this procedure on scra p cable to get the feel for the process of the cable preparation and the dimensions . 6. insert the tool on the cable and operate the dri ll in a fluid clockwise direction with slight forwa rd pressure. 7. as the inner conductor reaches the bottom of the tool, you will feel resistance and the cutting will go slower. keep the tool running a few extra t urns to chamfer the inner conductor. this will ensure a clean and uniform preparation. 8. periodically mist the blades with wd-40 or simil ar lubricant and clean the tool body. this will increase blades life significantly. 9. follow additional instructions that are provided with each connector.
|
